News

  • How to use manual butt welding machine

    How to use manual butt welding machine

    The manual hot melt butt welding machine is suitable for the butt welding of PE, PP, PVDF pipes and pipes, pipes and fittings in the trenches, and can also be used in the workshop. It consists of four parts: frame, milling cutter, independent heating plate, milling cutter and heating plate suppo...
    Read more
  • Precautions and troubleshooting for operating pipe fittings hot-melt welding machine

    Precautions and troubleshooting for operating pipe fittings hot-melt welding machine

    New or long-lasting unused pipe fittings butt fusion welding machine often greatly reduces the insulation resistance between the windings , the windings and the casing due to moisture. It is prone to short-circuit and grounding at the beginning of use, resulting in equipment and personal accident...
    Read more
  • HDPE Hydraulic Butt Fusion Welding Machine Problem solution

    HDPE Hydraulic Butt Fusion Welding Machine Problem solution

    Hydraulic butt fusion welding machine failures mainly include the following and related solutions: Fault 1. After plugging in, the motor of the hydraulic station rotates and a humming sound is heard, but the hydraulic push rod will not move; solution: first check whether the hydraulic oil in the...
    Read more
  • How to solve hot melt welding machine FAQ?

    How to solve hot melt welding machine FAQ?

    Common problems and troubleshooting of pipe fitting hot-melt welder in practical operation: for new or unused butt fusion welding machine and pipe fitting hot-melt welder accessories, the grounding resistance between winding resistance and between winding resistance and shell is greatly reduced d...
    Read more
  • What are the characteristics of automatic butt welding machines?

    What are the characteristics of automatic butt welding machines?

    Full automatic hot melt butt welding machine has the following characteristics: 1. Better welding (welding) parameters for pipes with different diameters, SDR and materials have been set in advance (select diameter, material and serial number). 2. The welding machine automatically measures the dr...
    Read more
  • How to handle electrofusion welding machine common problems?

    How to handle electrofusion welding machine common problems?

    The models of electrothermal fusion, heat shrinkable belt, electrothermal fusion welding machine and other products are different. Our products are widely sold. If you have any demand, please contact us. Let’s learn about the common problems of electric fusion welding machine The product m...
    Read more
  • What problems should be paid attention to when buying a cutting machine?

    What problems should be paid attention to when buying a cutting machine?

    There are many details to pay attention to when purchasing a multi-angle cutting machine, because only paying attention to the details can ensure that the final purchased product has a good performance in the application. So what problems should be paid attention to when buying a multi-angle cut...
    Read more
  • How to control PE pipe hot melt welding quality?

    How to control PE pipe hot melt welding quality?

    In the process of hot-melt welding of PE pipe, it is necessary to comprehensively control its quality, carry out management work for operators, mechanical equipment, welding materials and welding process, rely on the test work, and strive to reduce welding cracks and cracks. At present, ChinaR...
    Read more
  • Why is the hot melt welding of PE pipe defective

    Why is the hot melt welding of PE pipe defective

    1.Analysis of welding defects of PE pipe hot melt welder The PE pipe hot melt welding machine is applied in the installation of a pipe network project. The diameter of the main water supply pipe is greater than 63mm and the wall thickness is greater than 5mm. In the process of welding such pipe ...
    Read more
  • Why workshop fitting welding machine price much differents?

    Why workshop fitting welding machine price much differents?

    When the price of multi angle cutter is in trouble, it indicates that the price is changing constantly. So what factors affect the price, the following is the question.Let’s make a brief introduction to the questions, hoping to help those in need. Material use: Although there are many mate...
    Read more
  • Is Pipeline welding hard?

    Is Pipeline welding hard?

    Someone thought this butt fusion welding work very hard. Being start its really hard for workers who not welding before,but you can do followed instruction or videos to learn how to do. Before welding should know but...
    Read more
  • Who buy butt fusion welding machine in Labor Day 2021

    Who buy butt fusion welding machine in Labor Day 2021

    This is a customer from South America, and our story starts in September 2020. They need one hdpe pipe welding machine working in water system ,and the biggest diameter of hdpe 315mm,and also worked some small pipes. They speak Spanish ,but we speak chinese ,so we communicate by translated and s...
    Read more
12 Next > >> Page 1 / 2